A low-thrust transfer between the Earth–Moon and Sun–Earth systems based on invariant manifolds

A low-energy, low-thrust transfer between two halo orbits associated with two coupled three-body systems is studied in this paper. The transfer is composed of a ballistic departure, a ballistic insertion and a powered phase using low-thrust propulsion to connect these two trajectories. The ballistic departure and insertion are computed by constructing the unstable and stable invariant manifolds of the corresponding halo orbits, and a complete low-energy transfer based on the patched invariant manifolds is optimized using the particle swarm optimization (PSO) algorithm on the criterion of smallest velocity discontinuity and limited position discontinuity (less than 1 km). Then, the result is expropriated as the boundary conditions for the subsequent low-thrust trajectory design. The fuel-optimal problem is formulated using the calculus of variations and Pontryagin's Maximum Principle in a complete four-body dynamical environment. Then, a typical bang–bang control is derived and solved using the indirect method combined with a homotopic technique. The contributions of the present work mainly consist of two points. Firstly, the global search method proposed in this paper is simply handled using the PSO algorithm, a number of feasible solutions in a fairly wide range can be delivered without a priori or perfect knowledge of the transfers. Secondly, the indirect optimization method is used in the low-thrust trajectory design and the derivations of the first-order necessary conditions are simplified with a modified controlled, restricted four-body model.     

Measurements of heat transfer and pressure in a trailing edge cavity of a turbine blade

 An experimental investigation is conducted to obtain the heat transfer and pressure drop data for an integral trailing edge cavity test section that simulates a novel turbine blade's internal cooling passage with bleed holes. Local heat transfer is measured on both the suction and pressure sides by a transient liquid crystal technique, while pressures at six positions are recorded by pressure calibrators. Moreover, flow characteristic and its effect on heat transfer are analyzed for conditions with or without bleed flow. The experimental results show that, in the cases with bleed flow, local heat transfer on the pressure side exceeds that on the suction side in the first and second channels. In the cases without bleed flow, in the first and third channels, local heat transfer on the suction side weakens whilst it increases significantly on the pressure side. For the second channel, non-bleed condition leads to a more balanced heat transfer distribution between the upstream and downstream channel. Besides, after the bleed holes are blocked, heat transfer in the first bend region on the suction side declines sharply, while the opposite phenomenon occurs for the second bend region on the pressure side. In both bleed and non-bleed cases, the total pressure of six measurement positions decreases continuously along the channel at the same Reynolds number and it promotes for higher Reynolds number. Among all the measurement points, under the same flow rate condition, the highest speed occurs at Position 5, which also shows the maximum difference between the total and static pressures. When the bleed holes are blocked, the total pressure at each measurement position appears to increase.     

水气动量交换的实验研究

在风浪槽中进行水气动量交换实验，测量了不同风速和风区下的波浪及空气湍流流场。测量数据表明水面上风速分布符合对数律，水气界面附近在小范围的动量交换常通量层。阻力系数ＣＤ随风速增加线性增长，随波龄增加而减小。这一趋向与理论分析及外海帝测结果一致。对风浪发展过程中波浪和空气湍流谱结构的分析证明了水气运动的耦合关系。     

封严篦齿腔内流动及旋涡分布和顶板换热特性的实验研究

自行设计了吸气式篦齿换热风洞并对篦齿腔内部旋涡分布及流场和篦齿顶板换热特性进行了详细的研究。测出了在不同雷诺数和齿隙比篦齿腔中旋涡分布和顶板换热规律。从机理上分析了雷诺数和齿隙比对篦齿腔内流动旋涡分布及顶板表面局部换热规律的影响。     

利用航天器分舱段振动试验数据获取整器响应的方法

未来大型组合体航天器振动试验可能难以在现有设备上进行,需要进行分舱考核。文章针对此问题开展了利用分舱段振动试验获取整器响应的方法研究。提出的方法为:根据不同界面下模态的映射关系,利用单舱段的振动试验数据辨识出舱段的两端固支模态;采用模态综合技术计算出整器组合体模态参数,拟合出结构的加速度响应传递函数;结合整器的加速度试验条件可以给出整器的试验响应曲线。仿真验证结果表明该方法合理可行,具有工程应用价值。     

燃气轮机涡轮叶顶间隙气热技术研究进展

涡轮叶顶间隙泄漏流动对其流道内气动损失、传热状况甚至总体效率都有较为明显的影响,是降低涡轮气热性能的关键因素之一。长期以来,叶顶间隙区域的流动传热机理及其气热控制一直是燃气轮机领域研究的一个热点和难点问题。鉴于此,从叶顶间隙泄漏流动机理及影响因素、间隙泄漏控制方法、叶顶传热冷却机理、影响因素与控制、叶顶间隙气热优化以及过渡态叶顶间隙变化规律及建模与控制等方面对国内外近十年来涡轮叶顶间隙气热技术方面的研究进展进行综述,并简要总结了叶顶间隙泄漏流的常用研究方法,包括流动传热试验与数值计算方法等。最后,对涡轮叶顶间隙气热技术的未来研究重点和发展趋势进行了展望。     

自动转移飞行器的轨控总体方案

介绍了欧空局的自动转移飞行器（ATV）的轨道控制方案和技术。给出了ATV的飞行方案、测量敏感器和执行机构的配置，以及在空间站调相段、寻的段、接近段和最终逼近段的轨控策略。     

航空发动机进气支板电热防冰试验

为了研究电加热防冰的效果,开展了小型航空发动机进气支板的电加热防冰试验。结合该型号发动机进气支板的结构特点,设计了3种电热防冰加热布置方式,分别在支板沿轴向的不同位置采用1~3个电加热棒作为防冰热源。通过模拟不同的发动机进气结冰环境参数和电加热功率,在冰风洞中对3种电加热方式进行了防冰试验研究。通过布置在支板外表面的温度测点记录了防冰过程中支板表面的瞬态温度变化,分析了支板防冰过程中表面温度的变化特点。防冰试验研究了热源总功率、热源布置方式、液态水含量以及来流温度对支板防冰性能的影响。试验结果表明,合理的电加热方式可以取得较好的防冰效果,同时避免支板后部的溢流水结冰。     

Experimental investigation and correlation development of jet impingement heat transfer with two rows of aligned jet holes on an internal surface of a wing leading edge

Extensive experimental studies on the heat transfer characteristics of two rows of aligned jet holes impinging on a concave surface in a wing leading edge were conducted, where50000 Rej 90000, 1.74 H/d 27.5, 66° a 90°, and 13.2 r/d 42.03. The finding was that the heat transfer performance at the jet-impingement stagnation point with two rows of aligned jet holes was the same as that with a single row of jet holes or the middle row of three-row configurations when the circumferential angle of the two jet holes was larger than 30°. The attenuation coefficient distribution of the jet impingement heat transfer in the chordwise direction was so complicated that two zones were divided for a better analysis. It indicated that: the attenuation coefficient curve in the jet impingement zone exhibited an approximate upside-down bell shape with double peaks and a single valley; the attenuation coefficient curve in the non-jet impingement zone was like a half-bell shape, which was similar to that with three rows of aligned jet holes; the factors,including Rej, H/d and r/d, affected the attenuation coefficient value at the valley significantly.When r/d was increased from 30.75 to 42.03, the attenuation rates of attenuation coefficient increased only by 1.8%. Consequently, experimental data-based correlation equations of the Nusselt number for the heat transfer at the jet-impingement stagnation point and the distributionof the attenuation coefficient in the chordwise direction were acquired, which play an important role in designing the wing leading edge anti-icing system with two rows of aligned jet holes.     

烧结双多孔介质中沸腾换热的实验研究

对由铜粉烧结而成的三种双多孔介质结构进行了沸腾换热的实验。为了便于比较，同时对两种单多孔介质进行了沸腾换热实验。结果发现：当双多孔介质的微孔径和单多孔介质的孔径相同时，双多孔介质的换热系数和临界热流密度比单多孔介质高得多；对于同样微孔径的双多孔介质，存在最佳的粗孔径，其换热系数和临界热流密度最大；当逆静水压头减小的时候，换热系数和临界热流密度增加。